WiFi Book Club Q1 2016 May 9, 2016Welcome to the second edition of the WiFi Book Club! A series dedicated to getting the WLAN community reading & discussing the many books out there related to wireless. The goal is to read a book as part of the club once per quarter.
During the first month of a quarter I'll post a poll with a list of books to vote on. At the end of that month the votes will be tallied & the next book posted. A review & discussion of the current book will follow. Recommendations for books can be made via email, twitter, comments or carrier pigeon. While reading the book use the hashtag #WiFiBookClub to discuss on twitter. Authoring a book report is also a great way to get your creative juices flowing & add content to your blog.
"If you've been searching for a way to get up to speed on IEEE 802.11n and 802.11ac WLAN standards without having to wade through the entire specification, then look no further. This comprehensive overview describes the underlying principles, implementation details and key enhancing features of 802.11n and 802.11ac. For many of these features the authors outline the motivation and history behind their adoption into the standard. A detailed discussion of key throughput, robustness, and reliability enhancing features (such as MIMO, multi-user MIMO, 40/80/160 MHz channels, transmit beamforming and packet aggregation) is given, plus clear summaries of issues surrounding legacy interoperability and coexistence. Now updated and significantly revised, this 2nd edition contains new material on 802.11ac throughput, including revised chapters on MAC and interoperability, plus new chapters on 802.11ac PHY and multi-user MIMO. An ideal reference for designers of WLAN equipment, network managers, and researchers in the field of wireless communications."
Now to the part you've all been waiting for, the unboxing! Or maybe not. My order of the physical book was lost in transit, so I've gone the eBook route this time.
Opening the book gives you a nice About This Book popup.
Obligatory cover picture.
I've found the physical copy of this book on sale for a good bit cheaper than Amazon, notably at Abebooks. As always, do your research before purchase to make sure you are getting not only a good deal but the actual item you are looking for.
I'm really looking forward to reading this book & sharing in the discussion with everyone. Don't forget to send me your recommendations for future WiFi Book Club reads.
Lab Spectrum Analyzer February 17, 2016Spectrum analyzers are a very important tool for anyone working in the wireless field. Getting one for your lab to get some hands-on experience with is invaluable. Unfortunately they can be very costly. Enter the Cisco 3502 series access point with Clean Air technology, available on E-Bay for less than $100. Utilizing the on-board spectrum chip we are able to turn this access point into a remote sensor for use with the Cisco Spectrum Expert software. This process also works for any of the Clean Air enabled access points.
My choice method is as follows, it seems to be the quickest & doesn't require holding down the mode button or re-configuring your computer.
Console into the AP & login with the defaults. First we set the AP with a static IP & gateway pointing to itself. This seems to get the AP hung up on "Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)" allowing us to download the image before it forces DHCP renew which would disconnect us from the tftp.
This debug command gets us into a mode that allows us to use the archive command, which we use to download an autonomous image over tftp.
After this the AP will reboot & come back up as an autonomous AP. It takes very minimal configuration to get it ready for spectrum mode.
Login to the device using the defaults & set a hostname, this step is optional.
Enable the 2.4Ghz radio for spectrum operation & enable the radio.
Enable the 5Ghz radio for spectrum operation & enable the radio.
Take note of the NSI key from the output of show spectrum status, this will be needed when configuring Cisco Spectrum Expert. Also be aware that this value changes on reboot.
Now that the AP is setup we'll need a copy of Cisco Spectrum Expert. This is available on Cisco's software site. Once downloaded run the installer & accept the defaults.
When you first load it up a box will pop up. This is where you enter the IP address of your remote sensor, the NSI key & the band you want to look at.
Click OK to be presented with loads of spectrum goodness
If you'd like to look at both bands simultaneously then you can just load up another instance of the software & point it to the other band instead.
Giving you even more spectrum goodness.
Now that you have an inexpensive spectrum analyzer for your home lab you can start learning about layer 1 with hands-on experience. While this solution is great for the lab it lacks in portability. For a more robust & easier to carry solution check out offerings from AirMagnet & Metageek.
Don’t Miss A Thing – Join The WLAN Pros Email List